SLB series (Cosmetical Bottle bLow Molding Machine)

SLB-plastic-blow-molding-machine

Feature

  1. the mold head mechanism: the use of the split type of the head, not channeling material, more uniform, more uniform, planting processing, not accumulating material, the material is more smooth.
  2. plasticizing system: frequency conversion motor Hardened reducer with high quality nitride barrel screw, variable frequency speed control, energy efficient and stable yield.
  3. electronic control system: the use of PLC man-machine interface, all parameters set, modify, retrieval can be seen as the operation, the system runs stable, accurate positioningIndeed.
  4. application areas: food, medicine, petroleum, chemical, automotive, tools, toys and other industries.
  5. can be equipped with automatic overflow device: supporting cutting device and pull the end device, automatic operation, save labor.
  6. Its wide applicance in shampoo detergent cosmetical bottle blow molding machine, automatic bottle blow molding machine.

Parameters

Specifications SLB-55 SLB-65 SLB-75 SLB-80
Material PE,PP,EVA,ABS,PS PE,PP,EVA,ABS,PS PE,PP,EVA,ABS,PS PE,PP,EVA,ABS,PS
Max container capacity L 2 5 7.5 10
Number of die Set 1,2,3,4,6 1,2,3,4,6 1,2,3,4,6 1,2,3,4,6
Output(dry Cycle) pc/hr 1000*2 750*2 700*2 650*2
Machine Dimension(LxWxH) M 2800*2000*2200 3200*2400*2600 3400*2400*2600 3500*2400*2600
Total weight Ton 3.0T 3.8T 4.0T 4.5T
Clamping Unit SLB-55 SLB-65 SLB-75 SLB-80
Clamping force KN 32 42 65 68
Platen opening stroke MM 120–400 150–450 170—520 170—520
Platen size(WxH) MM 260*330 300*350 320*350 350*400
Max mould size(WxH) MM 300*330 400*350 400*350 450*400
Mold thickness MM 125–220 155–250 175—320 175—320
Extruder unit SLB-55 SLB-65 SLB-75 SLB-80
Screw diameter MM 55 65 75 80
Screw L/D ratio L/D 25 25 25 25
Melting capacity KG/HR 45 70 80 120
Number of heating zone KW 12 15 20 24
Extruder heating power Zone 3 3 4 4
Extruder driving power KW 7.5(11) 11(15) 15(18.5) 18.5(22)
Die head SLB-55 SLB-65 SLB-75 SLB-80
Number of heating zone KW 2—–5 2—–5 2—–5 2—–5
Power of die heating MM 6 6 8 8
Center distance of double die MM 120 130 130 160
Center distance of tri-die MM 80 80 80 80
Center distance of tetra-die MM 60 60 60 60
Center distance of six-die MM 60 60 60 60
Max die-pin diameter KW 150 260 200 280
Power SLB-55 SLB-65 SLB-75 SLB-80
Max drive KW 18 26 24 30
Total power KW 22 32 45 46
Fan power for screw KW 0.42 0.42 0.42 0.42
Air pressure mpa 0.6 0.6 0.6 0.6
Air consumption m3/min 0.4 0.5 0.5 0.5
Average energy consumption KW 11 15 18 22
This site is protected by WP-CopyRightPro